FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1734 total: showing 1001-1020)

Can a CFM100, NL115, and an NL120 be used together with a CR1000 or CR3000?
Is it possible to report CFM100 diagnostics in hourly transmissions so that any issues are detected promptly?
To save the same data elements to both the CR1000/CR3000 memory and a CFM100/NL115, are two data tables needed—one with the CardOut() instruction and one without? Or does the data table automatically get sent to both if there is a CardOut() instruction?
Does anything special need to be done in LoggerNet to retrieve data from the memory card in the CFM100?
Is it OK to insert a CompactFlash card that has old data on it into a CFM100 or NL115? Do CF cards always have to be reformatted or completely erased before inserting them into a device?
Why would a CompactFlash card that works fine in cameras and computer drives not work in a CFM100 or NL115?
Can any type of CompactFlash card be used with a CFM100 or NL115?
What size of CompactFlash cards can be used with a CFM100 or NL115?
When is a file on the card of a CFM100 or NL115 open?
What is the best way to collect data from a CompactFlash card in a CFM100?
What does a constant solid orange/red status LED on a CFM100 indicate?
What should be done if the rods of the 034B-L wind sensor are bent?
What is the power consumption of the 034B-L anemometer?
Do the vane and anemometer of the 034B-L produce analog or digital signals?
What type of pole and mounting bracket should be used to mount a 034B-L against an outside wall of a building, sticking up over the roofline?
Can the 034B-L store data?
What needs to be done to replace an existing 034A-L at a weather station with a new 034B-L?
What is the major difference between the 034B and the 03002?
If the connection can no longer be made to a data logger that is connected to a Raven XT-series modem via an RS-232 port, what might be the reason?
If the RS-232 connection between a data logger and a Raven XT-series modem works fine, but the CS I/O connection does not work, what might be the cause?

Previous Next